X-treme Tail Light for Model 3/Y
X-treme Tail Light for Model 3/Y
X-Treme Full LED Tail Lights for Tesla Model 3 & Model Y
Replace the factory rear light assemblies with a more aggressive X-shaped Full LED design featuring a dynamic startup sequence, sequential turn signals, high-visibility brake and reverse lighting, and vehicle-specific plug-and-play wiring.
Signature X-Style Design
A distinctive X-shaped light signature spans the inner and outer rear-light sections for a sharper and more customized Tesla rear-end appearance.
Full LED Lighting System
Integrated LEDs handle position, braking, turning, reverse and rear-fog functions without requiring separate replacement bulbs.
Sequential Turn Signals
Progressive streamer-style turn indicators create a clearly visible sequential animation when signaling.
Why the X-Treme Tail Light Stands Out
Unlike an overlay, tint film or supplemental LED strip, this product replaces the corresponding factory rear-light assemblies with dedicated X-style housings.
Each startup triggers a sequential X-style illumination sequence before the lights settle into their normal operating state.
The brake-light section increases brightness when braking to make the stopping signal more visually prominent to following traffic.
Dedicated high-output reverse-light sections provide additional rearward illumination when reverse is selected.
The system includes a high-intensity rear fog-light function where supported by the applicable vehicle and regional configuration.
Red or RGB
Red:
Uses the conventional red X-style appearance shown in
the standard product configuration.
RGB:
Adds multicolor decorative illumination to the X-style
lighting architecture. Exact RGB control behavior is not
fully published on the current product page.
Five Core Rear-Lighting Functions
Uses a dynamic breathing-style scanning effect as part of the current lighting program.
High-brightness LED illumination emphasizes braking for clearer rear signaling.
Progressive streamer illumination creates a moving turn-indicator effect.
Dual LED reverse-light sections illuminate when the vehicle is placed in reverse.
High-intensity rear fog-light functionality is built into the lighting system for applicable configurations.
Current manufacturer guidance specifies red turn signals for Fremont / Texas-built vehicles and amber turn signals for Shanghai / Berlin-built vehicles. If your vehicle is a US import but local regulations require amber indicators, confirm the required signal configuration before the order is fulfilled.
Tesery currently labels the RGB version as “Banned on AU roads.” Exterior RGB lighting may also be restricted elsewhere. Check applicable local vehicle-lighting regulations before using decorative RGB effects on public roads.
Vehicle-Specific Plug-and-Play Replacement
Confirm the Tesla model, production date and build plant so the correct tail-light and turn-signal configuration can be selected.
Open the trunk and carefully remove the required inner trim to reach the factory rear-light connectors and mounting points.
Disconnect the original lamp connectors and carefully remove the factory tail-light sections from the body and trunk-lid positions.
Position the dedicated left and right replacement assemblies into the original mounting locations and secure them evenly.
Connect the dedicated wiring harness according to the supplied installation instructions. Additional bulbs are not required.
Before reinstalling the trunk trim, verify startup animation, position lights, brake lights, left/right turn signals, reverse lights and applicable rear-fog operation.
The current product uses dedicated vehicle-specific wiring connectors and does not require additional bulbs or routine cutting and splicing of the original vehicle harness.
The current product selector covers Model 3 2021–2023.10 and Model Y 2021–2025.03 only. Highland and Juniper use redesigned rear-light assemblies and should not be assumed compatible.
Specifications
| Attribute | Details |
|---|---|
| Product | X-Treme Full LED Tail Light Assembly |
| Model 3 Fitment | 2021–2023.10 |
| Model Y Fitment | 2021–2025.03 |
| Model 3 Highland | Not Compatible |
| Model Y Juniper | Not Compatible |
| Lighting Technology | Full LED |
| Design | X-Style Inner + Outer Tail Light Design |
| Color Options | Red / RGB |
| RGB Control Method | Not Reliably Published |
| Startup Animation | Sequential X-Style Activation |
| Position / Width Light | Dynamic Breathing / Scanning Effect |
| Brake Light | High-Brightness LED |
| Turn Signal | Progressive / Sequential Streamer Effect |
| US-Built Turn Signal | Red — Fremont / Texas Configuration |
| Global-Built Turn Signal | Amber — Shanghai / Berlin Configuration |
| Reverse Light | Dual High-Brightness LED |
| Rear Fog Light | Integrated High-Intensity Function |
| Housing Material | ABS |
| Lens Material | PMMA |
| Water / Dust Resistance | IP67 |
| Installation | Direct Replacement / Plug-and-Play Harness |
| Additional Bulbs | Not Required |
| Wire Cutting / Splicing | Not Specified as Required |
| Vehicle Coding | Not Specified as Required |
| RGB Road Use in Australia | Manufacturer Currently Labels RGB Version as Banned on AU Roads |
| Package | 1 Pair of Brand-New X-Treme Tail Light Assemblies + Dedicated Wiring Components + Installation Instructions |
Quick Answers
Which Model 3 does this fit? +
Current fitment is Tesla Model 3 2021–2023.10.
Which Model Y does this fit? +
The current Tesery and TESKAY selectors list Model Y 2021–2025.03.
Does it fit Model 3 Highland? +
No. Model 3 Highland uses a redesigned rear-light assembly and is not included in the current selector.
Does it fit Model Y Juniper? +
No. The current fitment ends at Model Y 2025.03 and does not include the redesigned Juniper rear-light system.
What is the difference between Red and RGB? +
Red uses the conventional red X-style light appearance. RGB adds multicolor decorative illumination. The current product page does not clearly publish the RGB control method, so no app or remote-control function is guaranteed here.
Does it have a startup animation? +
Yes. The manufacturer specifies a sequential X-style activation sequence when the lighting system starts.
Are the turn signals sequential? +
Yes. The current manufacturer specification describes the turn signals as a progressive streamer / sequential effect.
Will the turn signal be red or amber? +
Current manufacturer guidance lists red signals for Fremont / Texas-built vehicles and amber signals for Shanghai / Berlin-built vehicles. Imported vehicles may require a different signal color to satisfy local regulations.
Does it include brake lights? +
Yes. High-brightness LED brake-light functionality is integrated into the Full LED assemblies.
Does it include reverse lights? +
Yes. Current specifications list dual high-brightness LED reverse-light functionality.
Are additional bulbs required? +
No. The light assembly uses an integrated Full LED design.
Is installation plug-and-play? +
The electrical installation is designed around dedicated plug-and-play harnesses. Normal tail-light and trunk-trim removal is still required to physically replace the assemblies.
Does installation require vehicle coding? +
Vehicle software coding is not identified as a required installation step in the current product documentation.
Are the lights waterproof? +
The current manufacturer specification lists an IP67 water- and dust-resistance rating.
Is the RGB version legal on public roads? +
Road-lighting regulations vary. Tesery currently specifically labels the RGB version as banned on Australian roads. Check the applicable regulations in your own country, state or province before using RGB effects on public roads.
What is included in the package? +
The current TESKAY listing specifies one pair of brand-new X-Treme tail-light assemblies together with the matching wiring components and installation instructions.
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
