OEM Windshield Wipers for Tesla Model 3/Y/X/S

$67.92 USD

Sale Sold out

Shipping calculated at checkout.

OEM-Style Windshield Wiper Blades for Tesla Model 3 / Y / S / X

Replace worn or streaking front wiper blades with a Tesla-specific set designed to follow the windshield curvature and connect to the compatible factory wiper arms. A practical maintenance upgrade for clearer visibility in rain, road spray and everyday driving conditions.

Vehicle-Specific Fit · Front Windshield · Direct Replacement

🌧 Clearer Wet-Weather Visibility

Designed to sweep water and road spray from the windshield and restore more consistent wiping when the original blades become worn.

🧩 Tesla-Specific Fitment

Select the correct vehicle configuration so the blade length, windshield sweep area and mounting interface match the compatible Tesla wiper system.

🔧 Direct Maintenance Replacement

Replace the worn blade assembly without modifying the windshield, wiper motor or original vehicle bodywork.

🚘 Everyday All-Season Use

Suitable for routine windshield cleaning in rain, light road grime and changing everyday driving conditions when correctly installed.

Restore Consistent Windshield Wiping

Replace Worn Wiper Blades
Wiper blades gradually lose wiping consistency as the wiping edge ages. Replacement helps restore cleaner windshield contact when the existing blades begin streaking or skipping.

Designed Around Tesla Windshields
Each compatible configuration is selected around the vehicle's front windshield and factory wiper-arm arrangement rather than using a one-size-fits-all universal blade.

Simple Preventive Maintenance
Fresh blades are an easy way to maintain visibility before heavy rain or seasonal weather makes worn blades more noticeable.

Signs Your Wiper Blades May Need Replacement

Symptom	What You May Notice
Streaking	Water lines remain on the windshield after each wipe
Skipping	The blade does not move smoothly across the glass
Uneven Wiping	Some areas of the windshield remain wet
Noise or Chatter	The blade vibrates or makes repeated noise across the glass
Visible Wear	The wiping edge appears cracked, split, hardened or deformed

Vehicle Compatibility

Tesla Model	Important Fitment Note
Model 3	Select the exact vehicle configuration shown in the product options
Model Y	Select the correct generation shown in the product options
Model S	Confirm model year and wiper-arm configuration
Model X	Confirm model year and wiper-arm configuration

⚠️ Model YL Uses a Separate Wiper Product

Tesla Model YL 2026+ uses a separate vehicle-specific wiper listing in the TESKAY catalog. Do not assume this Model 3 / Y / S / X product is compatible with Model YL.

⚠️ Select by Vehicle — Not Blade Length Alone

Tesla wiper-arm interfaces and blade specifications can vary between models and production generations. Choose the exact vehicle option listed for your car instead of ordering only by an approximate blade length.

Specifications

Attribute	Details
Product Type	Front Windshield Wiper Blade Replacement
Vehicle Range	Tesla Model 3 / Model Y / Model S / Model X
Installation Position	Front Windshield
Application	Replacement of compatible factory-style front wiper blades

⚠️ Blade Specifications Vary by Vehicle

Do not assume one blade size, connector or model-year range applies to every Tesla listed on this page. Use the selected vehicle configuration as the primary fitment reference.

Installation Overview

1. Put the Wipers in Service Position
Use the appropriate Tesla vehicle controls or owner's manual procedure to move the wiper arms into a safe service position before removal.

2. Protect the Windshield
Do not allow a bare spring-loaded wiper arm to fall against the windshield after removing the original blade.

3. Release the Existing Blade
Unlock the original blade from the wiper arm according to the connector design used on your vehicle.

4. Install the New Blade
Align the replacement with the factory wiper arm and secure it until the connection is fully engaged.

5. Check the Connection
Gently pull the blade to confirm it is properly locked before lowering the arm back onto the windshield.

6. Test the Wipers
Use washer fluid and operate the wipers to confirm both blades sweep normally without interference, abnormal movement or loose connections.

⚠️ Protect the Windshield During Installation

A raised wiper arm is spring-loaded. Once the blade is removed, do not allow the bare arm to snap back against the windshield because it can damage the glass.

Wiper Care Tips

Keep the Windshield Clean
Dust, sand, tree sap and dried debris can increase wear on the wiping edge.

Clean the Blade Periodically
Wipe the rubber edge gently with a damp clean cloth when dirt builds up.

Do Not Operate on Heavy Ice
Free the blade from ice before operating the wipers to avoid excessive stress on the blade and wiper system.

Inspect When Performance Changes
Replace the blades when persistent streaking, cracking, skipping or uneven contact remains after cleaning.

Quick Answers

Which Tesla models are available?

This listing is intended for compatible Tesla Model 3, Model Y, Model S and Model X configurations. Select your exact vehicle option before ordering.

Does this fit Tesla Model YL?

Do not use this listing for Model YL unless that vehicle is explicitly added to the selector. TESKAY currently carries a separate Model YL 2026+ wiper-blade product.

When should I replace my windshield wipers?

Replacement may be appropriate when the blades repeatedly streak, skip, chatter, leave unwiped areas or show visible deterioration along the wiping edge.

Are these universal wiper blades?

No. Select the correct Tesla model and vehicle configuration rather than treating them as a universal one-size-fits-all blade.

Do I need special tools?

Wiper-blade replacement is generally performed at the wiper-arm connection. The exact removal method depends on the connector used by the selected vehicle.

Why are my new wipers still streaking?

Check that the windshield is clean, the protective packaging has been removed, each blade is fully locked into the correct arm and the wiping edge is not contaminated or damaged.

Can I operate the wipers on an icy windshield?

Remove heavy ice and make sure the blades can move freely before operating the wipers. Forcing frozen blades can place unnecessary stress on the blade and wiper mechanism.