Model 3 Highland & Model Y Juniper Glove Box Hook
Model 3 Highland & Model Y Juniper Glove Box Hook
Folding Glove Box Hook for Model 3 Highland & Model Y Juniper
Add a practical hanging point beneath the passenger-side glove box for shopping bags, takeout and everyday carry items — without drilling, adhesive or permanent interior modification.
Up to 6kg Load Capacity
Current manufacturer testing rates the hook for loads up to approximately 6kg / 13lb, providing a convenient place for everyday bags and light carry items.
Fold-Flat Design
Fold the hook inward when it is not needed so it stays close to the glove-box edge and preserves the clean, minimalist appearance of the passenger area.
No Tools or Adhesive
A vehicle-specific snap-fit mounting structure secures the hook without screws, drilling, glue or double-sided tape.
Keep Loose Bags Off the Seat and Floor
Hanging lightweight food or drink bags helps reduce sliding and tipping compared with placing them loose on the passenger seat or floor.
Give small grocery and shopping bags a dedicated place instead of allowing them to move around the cabin.
Hang compact handbags, accessory bags or other suitable items with handles when you want them easy to reach.
The folding mechanism keeps the hook compact when it is not carrying anything, avoiding a permanently protruding universal-style hanger.
Manufacturer-Rated 6kg Maximum
The current manufacturer specification lists a maximum load of 6kg / 13lb. This rating should be treated as the upper limit rather than a recommended continuous working load. Avoid shock loading the hook or hanging unusually heavy objects while driving.
Compact Folding Structure
Designed around the refreshed glove-box structure instead of using a generic adhesive hook.
Folding the hanger inward reduces the amount of hardware protruding into the passenger footwell.
The snap-fit mounting method does not rely on double-sided tape or glue on the visible glove-box surface.
Snap In — No Drilling, Screws or Adhesive
Open the passenger glove box so the intended mounting edge and snap-fit position are easy to access.
Position the hook evenly against the compatible glove-box mounting edge before applying pressure.
Press the snap-fit sections onto the existing edge until the hook sits securely in position.
Open and close the glove box to confirm the accessory is correctly seated and does not interfere with normal operation.
Swing the center hanging section outward when you need a secure point for a suitable handled bag.
Fold the hook back toward the glove box when not in use to minimize protrusion into the passenger area.
Current manufacturer instructions specify snap-fit installation without drilling, screws or adhesive.
This version is designed around the refreshed glove-box structure used by Model 3 Highland and Model Y Juniper. Pre-Highland Model 3 and pre-Juniper Model Y glove boxes use different dimensions and mounting geometry.
Specifications
| Attribute | Details |
|---|---|
| Product | Folding Glove Box Hook |
| Model 3 Highland | 2024+ |
| Model Y Juniper | 2025+ |
| Model YL | 2026+ — Manufacturer Listed |
| Driving Position | LHD & RHD |
| Legacy Model 3 | Not Compatible |
| Legacy Model Y | Not Compatible |
| Material | High-Quality ABS Plastic |
| Manufacturer-Rated Maximum Load | 6kg / 13lb |
| Design | Foldable / Low-Profile |
| Mounting Method | Vehicle-Specific Snap-Fit |
| Adhesive | Not Required |
| Screws | Not Required |
| Drilling | Not Required |
| Tools | Not Required |
| Published Dimensions | Not Published |
| Published Product Weight | Not Published by Current Manufacturer Page |
| Package | 1 × Folding Glove Box Hook |
Quick Answers
Does it fit Model 3 Highland? +
Yes. Current manufacturer compatibility lists Tesla Model 3 Highland 2024+.
Does it fit Model Y Juniper? +
Yes. Current manufacturer compatibility lists Model Y Juniper 2025+.
Is Model YL compatible? +
The current manufacturer specification lists Model YL 2026+ for both left-hand-drive and right-hand-drive vehicles.
Does it fit the older Model 3? +
No. The current manufacturer states that pre-Highland Model 3 glove-box dimensions and panel geometry are different.
Does it fit the older Model Y? +
No. This version is designed around the Model Y Juniper glove-box structure rather than the previous Model Y interior.
How much weight can it hold? +
The current manufacturer rates the hook up to approximately 6kg / 13lb. Avoid exceeding this limit or subjecting the hook to sudden impact loads.
What can I hang from it? +
It is intended for suitable handled items such as small shopping bags, takeout bags and lightweight everyday carry items within the manufacturer's load limit.
Can the hook fold away? +
Yes. The center hanging section folds back toward the glove-box edge when it is not in use.
Does it interfere with opening the glove box? +
The current manufacturer states that the custom-fit design preserves normal glove-box opening and closing when correctly installed.
Is adhesive required? +
No. The current version uses a snap-fit installation and does not require double-sided tape or glue.
Do I need to drill holes or install screws? +
No. No drilling or screws are specified for installation.
Can I remove it later? +
Yes. Because the hook uses a mechanical snap-fit rather than adhesive or drilling, it can be removed carefully without leaving adhesive residue.
What material is it made from? +
The current manufacturer specification identifies high-quality ABS plastic.
Are exact dimensions published? +
No verified overall dimensions are currently published, so this description does not invent measurement values.
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
