LED Door Projector Lights for Tesla Model Y / 3
LED Door Projector Lights for Tesla Model Y / 3
LED Door Projector Puddle Lights for Tesla Model 3 & Model Y
Upgrade the original door courtesy lights with a crisp, Juniper-inspired geometric ground projection that automatically appears whenever the door is opened — combining distinctive styling with useful nighttime entry illumination.
Crisp HD Ground Projection
Projects a clean fan-shaped geometric pattern onto the ground whenever the door is opened, adding a refined welcome effect around the vehicle at night.
Osram LED Illumination
Current manufacturer specifications identify Osram LED components for bright, even projection from the compact factory-style housing.
Plug-and-Play Door Replacement
Remove the original courtesy light, disconnect the factory connector and plug the new projector into the same position — no wire cutting or drilling required.
A Cleaner Welcome-Light Upgrade
The projector uses the vehicle's original courtesy-light circuit, illuminating automatically when the door is opened and switching off with normal door-light operation.
The projected light makes the pavement next to the vehicle easier to see when entering or exiting in dark garages, driveways and parking areas.
The complete LED projector module replaces the original door-light unit instead of sticking an external projector onto the visible door trim.
Current manufacturer documentation identifies an integrated fuse as part of the electrical protection design of the projector module.
Because the installation uses the existing light position and connector, the original courtesy-light module can be reinstalled later if required.
Current Images Show a Geometric Projection
Older source copy refers to a “TESLA logo,” but the current Tesery and TESKAY product images show a white Juniper-inspired fan / geometric line pattern. This description follows the current product imagery rather than the older conflicting text.
Choose Front Doors or All Four Doors
Current 2PCS and 4PCS product imagery shows a small removal tool supplied alongside the projector modules for releasing the original courtesy light.
Direct Factory Courtesy-Light Replacement
Locate the existing courtesy / puddle light at the lower section of the compatible door trim.
Use the supplied small pry tool or a suitable trim-safe tool to carefully release the original light housing.
Release the vehicle connector from the original light without pulling directly on the factory wiring.
Plug the new LED projector module into the matching factory courtesy-light connector.
Confirm that the light activates and that the projection appears correctly on the ground before pressing the module fully into place.
Align the replacement housing with the original opening and press it in until it sits securely and flush.
The current product is designed as a direct replacement for the original courtesy light. Drilling, splicing and separate exterior power wiring are not specified as required.
Tesla has used different courtesy-light housings across models, production periods and door positions. Although the current manufacturer lists Model 3 2017+ and Model Y 2020+, compare your original light housing and connector with the product imagery if your vehicle has an unusual or recently updated door-light design.
Specifications
| Attribute | Details |
|---|---|
| Product | LED Door Projector Puddle Light |
| Model 3 | Current Manufacturer Listing: 2017–Present |
| Model Y | Current Manufacturer Listing: 2020–Present |
| Model YL | Listed by Current Tesery Source; Not Yet Explicitly Listed in TESKAY Selector |
| Model S / Model X | Not Listed for This Product |
| Quantity Options | Front Door 2PCS / Front & Rear Door 4PCS |
| Current Visible Projection | White Juniper-Inspired Geometric / Fan Pattern |
| LED Type | Manufacturer-Listed Osram LED |
| Housing Material | High-Quality ABS |
| Installation Position | Factory Door Courtesy / Puddle Light Position |
| Installation | Direct OEM-Style Replacement |
| Activation | Automatic with Door Courtesy-Light Operation |
| Built-In Fuse | Manufacturer-Listed |
| Vehicle Wire Cutting / Splicing | Not Required |
| Drilling | Not Required |
| Vehicle Coding | Not Specified as Required |
| Published Voltage | Not Published on Current Product Page |
| Published Power | Not Published |
| Published Lumen Output | Not Published |
| Published Color Temperature | Not Published |
| Published IP Rating | Not Published |
| Published Dimensions | Not Published |
| Package | 2 or 4 Vehicle-Specific LED Door Projector Modules Depending on Selected Quantity + Removal Tool Shown in Current Product Images |
Quick Answers
Is this an adhesive-mounted door projector? +
No. This product directly replaces the compatible original courtesy / puddle-light module in the door.
What pattern does the current product project? +
Current Tesery and TESKAY product images show a white geometric fan-style pattern inspired by the newer Tesla welcome-light design.
Why doesn't this description call it a TESLA wordmark projector? +
Some older source text still says “TESLA logo,” but all current product images for this specific listing show the geometric projection. This page follows the actual current product imagery.
Does it fit Model 3? +
The current manufacturer lists Model 3 2017–Present. Confirm the original light housing if your vehicle has an unusual door-light configuration.
Does it fit Model Y? +
The current manufacturer lists Model Y 2020–Present.
Does TESKAY currently list Model YL? +
Tesery's current source lists Model YL, but TESKAY's current selector still only explicitly lists Model 3 and Model Y. Confirm the light housing before ordering for Model YL.
What is the difference between 2PCS and 4PCS? +
The 2PCS set is intended for the two front-door positions. The 4PCS set adds compatible rear-door projector modules.
Does the light turn on automatically? +
Yes. It operates through the original door courtesy-light circuit and is designed to illuminate automatically with normal door-open light operation.
Does it use Osram LEDs? +
Yes. Osram LEDs are specifically listed in the current manufacturer specifications for this product.
Does installation require cutting wires? +
No. The replacement module plugs into the compatible original courtesy-light connector.
Is drilling required? +
No. It installs into the original door-light opening.
Is coding required? +
Vehicle software coding is not identified as part of the current installation procedure.
Does it include electrical protection? +
The current manufacturer description lists a built-in fuse. No detailed fuse rating is currently published.
Is the projector waterproof? +
No verified IP rating is published on the current product page, so this description does not claim an IP65 or IP67 rating.
Are wattage, lumen output or dimensions published? +
No reliable wattage, lumen output, color temperature, IP rating or overall dimensions are currently published for this listing, so those values are not invented here.
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
