Hidden Mud Flaps Mud Guard for Model Y Juniper（2025.03+）
Hidden Mud Flaps Mud Guard for Model Y Juniper（2025.03+）
Hidden Mud Flaps for Tesla Model Y Juniper / Model YL
Protect your Tesla's lower body panels from mud, road debris and everyday splash without adding bulky exterior styling. These hidden mud flaps use a low-profile vehicle-specific design that blends closely with the original body lines while providing front and rear wheel-area protection.
🛡 Front & Rear Protection
Helps reduce mud, road spray, salt and small road debris reaching the lower painted body areas behind the wheels.
👀 Low-Profile Hidden Design
The compact shape stays close to the body and is designed to remain visually subtle from most viewing angles.
🌡 Premium TPE Construction
Flexible thermoplastic elastomer material is designed for exterior use across a wide temperature range from -40°C to 110°C.
🔧 OEM-Point Installation
Uses existing vehicle mounting locations with a snap-in installation design, avoiding the need to drill new holes into the body.
Protection Without the Bulky Look
Helps Protect Lower Paintwork
The front and rear mud flaps help reduce direct exposure to mud, salt, gravel and road spray kicked up by the tires.
Preserves the Clean Juniper Profile
The hidden design stays much closer to the original body shape than conventional oversized mud flaps.
Easy to Maintain
The TPE surface can be rinsed with water during normal vehicle washing, with no special care procedure required.
Fitment
| Vehicle | Compatibility |
|---|---|
| Tesla Model Y Juniper | 2025.3 – Present |
| Tesla Model YL (6-Seater) | 2026 – Present |
| Previous-Generation Model Y | Not Compatible |
⚠️ Juniper / Model YL Only
This version is designed for Model Y Juniper 2025.3+ and Model YL 6-Seater 2026+. It is not compatible with the previous-generation Model Y because the mounting positions are different.
Specifications
| Attribute | Details |
|---|---|
| Product | Hidden Mud Flaps / Mud Guards |
| Material | Premium Thermoplastic Elastomer (TPE) |
| Temperature Range | -40°F to 230°F (-40°C to 110°C) |
| Quantity | 4 PCS / Set |
| Configuration | 2 Front + 2 Rear |
| Mounting | Snap-In / Existing OEM Mounting Points |
| Total Weight | Approx. 1.39 lbs / 0.63 kg |
| Installation Time | Approx. 10 Minutes |
Package Includes
2 × Front Mud Flaps
2 × Rear Mud Flaps
1 × Screws & Clips Set
Installation Notes
1. Confirm the Vehicle Version
Make sure the vehicle is a compatible Model Y Juniper or Model YL before installation.
2. Clean the Mounting Area
Remove mud and debris from the wheel-arch area so the mounting points are easy to access.
3. Align With Existing Mounting Points
Position each mud flap at the corresponding front or rear wheel location and align it with the factory mounting points.
4. Secure the Clips and Fasteners
Install the supplied clips and screws as required and confirm that the mud flap sits firmly against the body.
5. Check All Four Corners
Before driving, make sure every mud flap is firmly secured and does not interfere with the tire or surrounding trim.
⚠️ Protection Limitations
Mud flaps help reduce road spray, mud and small debris reaching the vehicle body, but they cannot prevent all paint damage from high-speed stones, large debris, impacts or harsh off-road conditions.
Quick Answers
Does this fit Model Y Juniper?
Yes. The current listing specifies compatibility with Tesla Model Y Juniper 2025.3-Present.
Does this fit Model YL?
Yes. The current listing includes Tesla Model YL 6-Seater 2026-Present.
Does it fit the previous-generation Model Y?
No. The supplier states that the earlier Model Y uses different mounting positions and is not compatible with this version.
What material are the mud flaps made from?
They are made from premium thermoplastic elastomer (TPE).
Do I need to drill the vehicle?
No. The current product page describes installation using the vehicle's existing mounting points with no drilling required.
How long does installation take?
The supplier states that the complete four-piece set can be installed in approximately 10 minutes.
Do the mud flaps affect ground clearance?
The supplier states that the low-profile design is intended to avoid interfering with normal ground clearance. Actual clearance can still vary with road conditions and vehicle loading.
How do I clean them?
Rinse the TPE mud flaps with water during normal vehicle washing. No special cleaning procedure is required.
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
