Front Bumper Fog Light Replacement for Tesla Model 3/Y 【US Version】
Front Bumper Fog Light Replacement for Tesla Model 3/Y 【US Version】
Front Bumper Fog Light Replacement for Tesla Model 3 & Model Y
Restore the original front bumper lighting of your Tesla with a US-spec replacement fog-light assembly engineered around the factory mounting position and OE reference numbers 1077391-00 / 1077392-00.
Direct OE-Style Replacement
Built around the original bumper mounting geometry for a straightforward replacement of a damaged, cracked or failed US-spec fog-light assembly.
Focused Fog-Light Optics
The current manufacturer specification uses a halogen light source and dedicated lens design to produce concentrated forward illumination in low-visibility driving conditions.
Plug-and-Play Installation
Uses the corresponding original-style connector and mounting points without requiring drilling, wire cutting or permanent bumper modification.
Built for Repair, Restoration & Direct Replacement
The housing, mounting tabs and electrical interface are designed around the corresponding factory fog-light location rather than functioning as a universal add-on lamp.
This US-version product is associated with OE references 1077391-00 and 1077392-00. Verify your original lamp before ordering.
Choose Only Left Side, Only Right Side or Left + Right depending on whether you are repairing an individual damaged lamp or refreshing both sides.
The current manufacturer specification identifies OEM-grade ABS construction for the exterior lamp assembly.
Manufacturer materials describe sealing tests intended to protect the internal light components during normal exterior vehicle use.
US Version Only
This product page is specifically for the 1077391-00 / 1077392-00 US-version lamp family. Do not use this page to order a Shanghai / Berlin lamp identified by 1624797 / 1624798.
Complete Exterior Light Assembly
Verify the OE Number Before Installation
Confirm your Tesla model, production year and original lamp reference before ordering. The OE number is more reliable than vehicle year alone.
Choose Left, Right or Left + Right depending on which assembly needs replacement.
Access may require loosening or removing the appropriate wheel-arch liner, lower trim or surrounding bumper components.
Disconnect the factory electrical connector and release the original lamp from its mounting points.
Position the new assembly at the original mounting location, connect the matching plug and secure the lamp using the existing mounting arrangement.
Test the replacement lamp before reinstalling all wheel-arch, underbody or bumper trim.
Tesla used different front lamp assemblies across factories and markets. This listing is for the US-spec 1077391-00 / 1077392-00 family. If your original lamp is marked 1624797 / 1624798, use the corresponding Shanghai / Berlin version instead.
Current manufacturer instructions describe the assembly as direct bolt-on / plug-and-play. Drilling, cutting or splicing the factory harness is not required.
Specifications
| Attribute | Details |
|---|---|
| Product | Front Bumper Fog Light Replacement |
| Market Version | US Version |
| Model 3 Compatibility | 2017–2023 |
| Model Y Compatibility | 2020–2024 |
| Model 3 Highland | Not Compatible |
| Model Y Juniper | Not Compatible |
| OE References | 1077391-00 / 1077392-00 |
| Shanghai / Berlin 1624797 / 1624798 | Not This Version |
| Position Options | Left + Right / Only Left Side / Only Right Side |
| Housing Material | OEM-Grade ABS |
| Light Source | Manufacturer-Listed Halogen Bulb |
| Optical System | Dedicated Fog-Light Lens / Reflector Assembly |
| Installation Position | Original Front Bumper Fog-Light Location |
| Installation Type | Direct Replacement / Bolt-On / Plug-and-Play |
| Drilling | Not Required |
| Wire Cutting / Splicing | Not Required |
| Vehicle Coding | Not Specified as Required |
| Weather Protection | Sealed Exterior Lamp Construction |
| Published IP Rating | Not Published |
| DOT / E-Mark Certification | Not Published on This Specific Product Page |
| Published Wattage | Not Published |
| Published Lumen Output | Not Published |
| Published Color Temperature | Not Published |
| Package | Selected Left, Right, or Left + Right Fog-Light Assembly Configuration |
Quick Answers
Which version is this listing for? +
This is the US-version fog-light replacement associated with OE references 1077391-00 and 1077392-00.
Does it fit Tesla Model 3? +
Current manufacturer and TESKAY compatibility lists Model 3 2017–2023.
Does it fit Tesla Model Y? +
Current manufacturer and TESKAY compatibility lists Model Y 2020–2024.
Does it fit Model 3 Highland? +
No. Model 3 Highland uses a redesigned front lighting and bumper configuration and is not included in this listing.
Does it fit Model Y Juniper? +
No. Model Y Juniper is not included in the current US-version compatibility range.
How do I know whether I need the US version? +
Check the original lamp for OE references 1077391-00 / 1077392-00 and compare its housing and connector with the product images before ordering.
What if my original lamp says 1624797 or 1624798? +
Do not order this US-specific listing. Those references belong to the separate Shanghai / Berlin configuration.
Can I buy only one side? +
Yes. Current options include Only Left Side, Only Right Side and Left + Right.
Is this the modified 4-in-1 steering fog light? +
No. That is a separate product with daytime-running, turn-signal and steering-linked functions. This listing is the US-version OE-style replacement fog-light assembly.
What type of light source does it use? +
The current manufacturer FAQ describes the fog-light optical system as using a halogen bulb and dedicated lens.
Does installation require drilling? +
No. The current manufacturer describes the lamp as a direct bolt-on replacement using the original installation location.
Do I need to cut or splice wires? +
No. Current documentation identifies plug-and-play electrical installation without modifying the factory harness.
Is software coding required? +
No vehicle coding is specified as part of the current replacement procedure.
Is an IP waterproof rating published? +
The manufacturer describes sealed exterior construction, but no verified IP65 or IP67 rating is published on this specific product page.
Is this product DOT or E-Mark certified? +
No DOT or E-Mark certification statement is published on this specific US-version product page, so this description does not claim either certification.
Are wattage, lumen output or color temperature published? +
No verified wattage, lumen output or color-temperature specification is currently published for this listing, so those values are intentionally not invented here.
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
